wireless controller or the thumb presses, the yellow LED does not light up as these do not support the high-speed protocol. Fast flashing of the green LED indicates active communication with the controller. If the controller is switched off, the green LED only flashes very slowly.
Power Base menu: Press both red and gray buttons for approx. 2 seconds. The yellow LED starts to flash quickly.
Now release the keys. The yellow LED flashes once, then the number of flashes of the green LED indicates which function is assigned to the switch button:
no blinking: the switch button has no function
Flashes 1x: the switch button switches off the motor, but allows it to roll without a brake
Flashes twice: the switch button switches off the motor and the brake works with the value set on the Triple Wireless Controller.
Flashes 3x: the switch button switches off the motor and the brakes work at maximum power, regardless of the value set on the controller.
Then the yellow LED flashes again and the game repeats itself. The configuration can be changed by pressing the gray button. The blinking of the green LED changes accordingly. To save the new state, press the "Binding" button again. The Powerbase is now back in normal operating mode.
Resetting to delivery status:
Hold both buttons down for about 10 seconds. After about 2 seconds, the yellow LED starts flashing quickly. The flashing stops after about 10 seconds. Finished.
